NIGHTRIDERS Magnetic License Plate Holders (1 sides)

NIGHTRIDERS Magnetic License Plate Holders – a perfect way to quickly and easily enhance your vehicle’s aggressive look while making the detailed car washing process more convenient. These holders are designed to withstand high speeds (up to 300+ km/h), road irregularities, as well as harsh winter and summer conditions and other environmental factors.

‼️ To ensure the safety of the product and your license plates, we recommend removing the plates before using automatic (tunnel) car washes or driving through difficult off-road conditions that may apply physical stress to the holders.

Before installing the product, be sure to read the user instructions and watch the installation video.

Installation Instructions:

Holder Installation:

Preparation:
1. After removing the old holders, thoroughly clean the bumper and the inner side of the license plates;
2. Ensure you select the correct screws from the set for secure magnet installation (both shorter and longer screws are included as needed);
3. Place a washer (spacer) under the magnet to protect the bumper from scratches (if the holder is mounted directly onto the vehicle’s paint).

!IMPORTANT!

• Magnets are very fragile!
• Do not overtighten and do not use power tools!
• Magnets can withstand up to 3 Nm of tightening torque.

Installation:
• Place the washer (spacer) on the back side of the magnet;
• Insert the screw through the magnet with the washer;
• Fasten the magnet with the screw to the bumper;
• Check that the magnets are firmly secured and do not move;
• Attach the included holders onto the magnets;
• Remove the protective film from the double-sided adhesive tape;
• Align the license plates to ensure they are centered (the adhesive on the holders is very strong! Before pressing the plate onto the holders, make sure it is properly centered);
• After a few minutes, remove the plates and press firmly across the entire holder surface to ensure the adhesive bonds securely;
• Before using the holders, allow the double-sided adhesive tape time to fully cure;
• The frames must be installed at room temperature conditions to ensure all components function properly.

Note: The frames may need to be adjusted depending on the license plate mounting position, body lines, or any previously made larger mounting holes.